Site Information

 Loading... Please wait...

Accessories

  • Morningstar DIN Rail Mounting Clips

    These rugged plastic clips have been custom made to match the mounting holes on the SunSaver controllers and to either snap on to the middle of the rail or to slide on from the end of the rail. The clips also provide a...

  • Morningstar EIA-485/RS-232 Communications Adapter

    By converting to EIA-485, the RSC-1 allows up to 128 Morningstar products to communicate on the same communication bus and over much greater distances. Typical configurations include: Networking several TriStar and/or...

  • Morningstar Ethernet MeterBus Converter

    The New Ethernet MeterBus Converter (model: EMC-1) is now shipping from our warehouses.  It enables IP based network and internet connectivity to any Morningstar product that features an...

  • Morningstar Ground Fault Protection Device 150V

    Morningstar’s Ground Fault Protection Device products are built to provide a superior solution to ground fault protection for both off-grid and on-grid PV systems. The GFPD products’ are available in two model...

  • Morningstar Ground Fault Protection Device 600V

    Morningstar’s Ground Fault Protection Device products are built to provide a superior solution to ground fault protection for both off-grid and on-grid PV systems. The GFPD products’ are available in two model...

  • Morningstar MeterHub

    The MeterHub allows up to 15 Morningstar products on a single MeterBus network. The product electrically isolates devices that supply power to the network, preventing damage to the network in the event of grounding problems...

  • Morningstar PC MeterBus Adapter

    Morningstar’s PC Meterbus Adapter (MSC) converts a controller’s meter port (RJ-11 phone type connector) to a standard RS-232 serial connector for connection to a PC or other equipment. The MSC may be used with...

  • Morningstar Relay Driver

    Morningstar’s RelayDriver™ is a logic module which provides high level system control functions such as high/low voltage alarms, load control and generator start.   For additional information and technical...

  • Morningstar Remote Meter

    Morningstar’s Remote Meter (RM-1) is a universal, four digit display with custom icons that is compatible with several Morningstar controllers and inverters. This meter provides comprehensive system information for...

  • Morningstar Remote Temperature Sensor

    The RTS is recommended whenever the temperature of the battery varies more than 5°C (9°F) during the year. The RTS is compatible with: SunSaver MPPT™TriStar MPPT™SunKeeper™SunSaver...

  • Morningstar TriStar Digital Meter-2

    The meter will display a great deal of information about the TriStar controller and the operation of your system. In addition, the meter enables manual functions and controller diagnostics. These...

  • Morningstar TriStar Meter-2-600V

    The TriStar Meter-2-600V specifically designed for the TriStar MPPT-600V displays extensive system and controller information, logged data, bar graph metering as well as alarms and faults for easy troubleshooting.  The...

  • Morningstar TriStar Remote Meter-2

    The meter is compatible with the TriStar, TriStar MPPT, TriStar MPPT 600V, and MeterHub. It displays the same data as the TS-M-2, however, it does not mount to the controller. It ships with 30 meters of cable and a flat face...

  • Morningstar USB MeterBus Adapter

    The USB MeterBus Adapter (model: UMC-1) converts the Morningstar MeterBus RJ-11 electrical interface to a standard USB 2.0 interface which allows communication between a PC and a Morningstar charge controller or inverter...

  • Morningstar Wire Box for ProStar MPPT

    The Wire Box for ProStar MPPT (model: PS-MPPT-WB) provides an effective cover for wires and conduit leading to and from the ProStar MPPT controller. This Wire Box may be required or recommended by authorities having...

  • OutBack Power AXS Port

    The AXS Port Modbus TCP, now OPTICS RE compatible, is a powerful and economical tool that allows installers and system owners the ability to monitor and control system status from any location.When paired with OPTICS RE, the...

  • OutBack Power FLEXnet DC Monitoring Device

    OutBack Power's FLEXnet DC is the ultimate DC system monitoring device. Our integrated networked communications make valuable, usable data available from your system and viewable on an OutBack MATE communications...

  • OutBack Power FLEXware ICS Combiner

    The OutBack Power FLEXware ICS combiner box is a cost-effective integrated solution for solar installations requiring basic combining and overcurrent protection needs.  The FLEXware ICS offers value, simplicity, and...

  • OutBack Power FLEXware ICS Plus Combiner

    FLEXware ICS Plus is the first end-to-end solution listed to UL 1741 with photovoltaic rapid shutdown systems (PVRSS) for both battery-based and grid-direct solar systems.  This solution meets the following 2014...

  • OutBack Power FLEXware PV Combiner

    OutBack's FLEXware PV Combiner Series sets the new standard for PV balance-of-system hardware. Ideal for both small or large systems, the FLEXware PV8 and FLEXware PV12 accommodates the overcurrent protection...